| specifications︰ | KM-350PA：
Main machine motor: 2/4HP 3.0/2.2kw
Rotate speed of Main Shaft: RPM36/18
Outer diameter of Saw Blade: 300/315/350mm
Inner hole of Suitable Saw Blade:
Φ32mm
Pin hole of Suitable Saw Blade :2×Φ11×PCD63
Maximum Cutting Round Pipe:
Φ115mm
Maximum Cutting Square Pipe:100×100mm
Maximum Cutting Round Rod: Φ60mm
Cooling Water Pump: 90w
Compressed Air: 0.8Mpa
Volume of machine :1400mmx1080mmx1900mm
Net Weight of machine :300kg |
| Advantages︰ | Complete Germany technology gesign.
The products are devided into H1high speed type and H2 low speed type ,can suit various metallic cutting.
Adopt dual sides and dual orientations clamping make the working component stable, the notch without burr, no powder in cutting, low noise, low pollution. |
|
|
1、This series of metallic circular saw machines can be divided into: hand-moving 、air clamping 、semi-automatic types.
2、Adopt dual sides and dual orientations clamping make the working component stable, the notch without burr, no powder in cutting, low noise, low pollution.
3、Accurate cutting and the speed exceeds band saw , at the same time the cutting face is smooth but not sends out heat , save second machining.
4、The machine head can be controlled to side cutting left and right or mill groove. Accurate angle , the pipe joint is perfect.
5、Cycle cooling system, possess oil storage tank with special big capacity, ensure saw blade lifetime , the cutting face is flat.
6、Automatic clamp automatic knife entering type, except basic type structure and parts ,the entering and reversion of clamping pliers and machine head are all air pressure automatic type. |
|
|
|
|
